These are
CN5625AL standard mount (two hole with 1/2" spacing) moving magnet
cartridges that will replace virtually any brand cartridge in any
turntable which uses a removeable headshell and many that don't; if you
see two screws holding your current magnetic
cartridge in
place, this Audio Technica will replace it.
Don't waste time searching for a replacement stylus for your current
cartridge when you can simply replace the whole thing for
$24.50!!! Shipping via
First Class Mail is free; you'll have your purchase in 3-4 business
days!!!! Simply click on the picture to go to our eBay Store and make
your purchase....
- Frequency
response;
20-20000hz
- Channel
separation; 20/15
(dB at 1 kHz/10kHz)
- Vertical
tracking force; 1.
5-3. 0 grams
- Stylus
construction; bonded
round shank; 0.7mil conical tip
- Recommended
load impedence;
47k ohms
- Output;
4.2mV at 1kHz,
5cm/sec
- Channel
Balance; 1. 5dB
- Alloy
tube cantilever
- $24.50;
First class
mail shipping is FREE!!
|
These
are AT3482P P-Mount (T4P) moving magnet cartridges with
diamond styli that will replace virtually any brand magnetic cartridge
which plugs directly into the end of a linear or straight radial
tonearm (generally found in Technics turntables; if a single screw thru
the side of the tonearm holds the cartridge in place, its a P-mount). Don't waste time searching
for a
replacement stylus for your current cartridge when you can simply
replace the whole thing for $24.50!!! Shipping via
First Class Mail is free; you'll have your purchase in 3-4 business
days!!!! Simply click on the picture to go to our eBay Store and make
your purchase....
- Frequency
response;
20-20000hz
- Channel
separation; 24/15
(dB at 1 kHz/10kHz)
- Vertical
tracking force; 1.
0-1. 5 grams
- Stylus
construction; bonded
round shank; 0.7mil conical tip
- Recommended
load impedence;
47k ohms
- Output;
5. 0mV at 1kHz,
5cm/sec
- Channel
Balance; 1. 5dB
- Carbon
fiber cantilever
- $24.50;
First class
mail shipping is FREE!!
|
