These are
CN5625AL standard mount (two hole with 1/2" spacing) moving magnet
cartridges that will replace virtually any brand cartridge in any
turntable which uses a removeable headshell and many that don't; if you
see two screws holding your current magnetic cartridge in
place, this Audio Technica will replace it. Radio Shack sells this same
cartridge (it's "SPECIAL ORDER", not stocked in the stores) for $39.99.
Don't waste time searching for a replacement stylus for your current
cartridge when you can simply replace the whole thing for
$24.50!!! Shipping via
First Class Mail is free; you'll have your purchase in 3-4 business
days!!!!
- Frequency response;
20-20000hz
- Channel separation; 20/15
(dB at 1 kHz/10kHz)
- Vertical tracking force; 1.
5-3. 0 grams
- Stylus construction; bonded
round shank; 0.7mil conical tip
- Recommended load impedence;
47k ohms
- Output; 4.2mV at 1kHz,
5cm/sec
- Channel Balance; 1. 5dB
- Alloy tube cantilever
- $24.50; First class
mail shipping is FREE!!
|
These are AT3482P P-Mount moving magnet cartridges with
diamond styli that will replace virtually any brand magnetic cartridge
which plugs directly into the end of a linear or straight radial
tonearm (generally found in Technics turntables; if a single screw thru
the side of the tonearm holds the cartridge in place, its a P-mount).
Radio Shack sells this same cartridge (it's "SPECIAL ORDER", not
stocked in the stores) for $29.99. Don't waste time searching for a
replacement stylus for your current cartridge when you can simply
replace the whole thing for $24.50!!! Shipping via
First Class Mail is free; you'll have your purchase in 3-4 business
days!!!!
- Frequency response;
20-20000hz
- Channel separation; 24/15
(dB at 1 kHz/10kHz)
- Vertical tracking force; 1.
0-1. 5 grams
- Stylus construction; bonded
round shank; 0.7mil conical tip
- Recommended load impedence;
47k ohms
- Output; 5. 0mV at 1kHz,
5cm/sec
- Channel Balance; 1. 5dB
- Carbon fiber cantilever
- $24.50; First class
mail shipping is FREE!!
|
